home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
mods
/
cellular
/
d_tel02.txt
< prev
next >
Wrap
Text File
|
1993-04-11
|
2KB
|
62 lines
DIAMONTEL MESA 60, 60x, 80x
NOTES: These are single NAM units.
The ESN prefix is 134 decimal, 86 hex.
See file MITSTEST.TXT for test mode access.
DiamondTel: 708-298-9223
NAM programing:
1. Press PWR key (FCN & 0 on model 60) for one second to turn on phone.
2. Wait for the wake up cycle to end and the display to clear.
3. Within ten seconds press and hold the CLR key while entering
6 9 2 6 2 3 2 (reset code).
4. Release CLR.
5. The phone will display the first data entry.
6. Press the SEND key to store information and increment the step number.
7. Press CLR to correct any item.
8. Press END to complete programing and exit.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 10 DIGITS MUTE MIN (AREA CODE AND TEL#)
02 4 DIGITS SEC SECURITY CODE
03 00000 - 32767 Sid SYSTEM ID
04 0 OR 1 LU LOCAL USE MARK
05 0 OR 1 E MIN MARK
06 333 OR 334 IPCH INITIAL PAGING CHANNEL
07 2 DIGITS ACC ACCESS OVERLOAD
08 0 OR 1 PrEF PREFERRED SYSTEM
09 00 TO 15 GI GROUP ID (10 FOR USA)
10 0 OR 1 EE END TO END (DTMF) DIALING
11 0 OR 1 rI ROAM INHIBIT
12 0 OR 1 Ab PREFERRED SYSTEM
13 0 OR 1 AL AUTO LOCK
14 0 OR 1 bO HORN ALERT
NOTES:
To install lock code: With phone out of programing mode press FCN, STO,
NNNN LLL CLR (where NNNN is 4 digit security code and LLL is new lock code).
LOCK: F 2. UNLOCK: Enter three digit code then STO.
SYSTEM SELECT: F 1 displays current, then press one of the following:
"A" preferred phones:
0 = Pref A, 1 = Pref B, 2 = Home Only, 3 = A only, 4 = B only.
"B" preferred phones:
0 = Pref B, 1 = Pref A, 2 = Home Only, 3 = B only, 4 = A only.